Questions & Answers for: Honda Odyssey use moth balls

CV joint replacement CV joints are popping and need to be replaced. I can't free the lower ball joint from the axle housing assembly so it can be swung aside to allow removal and replacement of the CV

replacing rear hatch door cylinders on honda odyssey Why are you replacing? If your just wanting to get them off pull the ends out and slide them off hte ball. May need a small flat screwdriver or a ...

...as some chipmunks had a field day with her newer car. She ended up placing some moth balls around where her car was parked, to keep the critters away. If you have wildlife near your car, look

replacing tailgate cylinders It appears that one or both of the tailgate cylinders have failed. How do I replace the tailgate cylinders? Look on ebay for new replacements, they come with instructions.

estimate cost on tune up for 1997 Honda Odyssey To change the spark plugs, spark plug wires, and filter, I would say that a ball park figure would be over $150 depending on the shop.

jerking when changing park to reverse and when changing gears Could be the check balls. But before this check the oil level of the transmission and change it if you see any change in the oil color ...

THE GAS STRUTS THAT HOLD OPEN THE REAR HATCH ON MY WIFES 2000 ODYSSEY HAVE BECOME WEAK AND NO LONGER WORK. HOW HARD IS IT TO REPLACE THEM? Not difficult at all. They are usually a ball and socket ...

have anyone out there ever change inner tie rods on a1995 honda odyssey?,if so simply explain,THANKS EXPLAIN THE PROCEDURE AND WHAT TOOL OR TOOLS NEEDED. Procedure on replacing the inner tie rod ...

Clunk In Rear When I Turn I am hearing a single "clunk": noise when I make a left turn. it isn't all the time; just when I turn. Last summer I replaced both shocks in the rear and ...

gear indicator says the car is in drive even though the shifter is in Park. will not come out of drive there is a ball bearing in the valve slide inside the oilpan on modern cars it has oil travel ...