Question about MFC 420CN All-In-One InkJet Printer
start mono (b/w) then 4x arrow-up-button. Machine will be in maintainance mode and beeps. Press 7 then 6. Machine displays Cleaning_all. Press 3. Power_p all will be displayed. Press start mono (b/w).
...start mono (b/w) then 4 times arrow-up button.The machine displays maintenance and all button will flash.press 7 then 6 : claening_all . Press 3: powerp_all press start mono. machine will run a power ...
...start mono (black copy button) then fourtimes arrow-up button (tel.index). machine will be in maintenance mode. press 7 then 6 then 4 then start mono. machine will refresh tubes and ph with fresh ink ...
Question about MFC 210C All-In-One InkJet Printer
...start mono (black copy button) then fourtimes arrow up button (tel.index). machine will be in maintenance mode and all buttons will flash. press 7 then 6 then 4 then start mono. machine will ...
Question about DCP 115C All-In-One InkJet Printer
...start mono and 4-times arrow up, but the machine it seems blocked. It means when I press start mono button (blue) the printer gives 3 pip's (3 short noise signals) and for each of 4 press of arrow up ...
...MONO START, 4X on ARROW UP. (within 2 seconds). 2. Using arrow up button look for the following: a. 8 then press SET or OK b. 0 then press SET or OK 3. Using MONO START, just press it until the word ...
Question about MFC 580 All-In-One InkJet Printer
...Mono Start button. 6. Key in 0004 and press Mono Start button. 7. "MAINTENANCE" appears again on the display. 8. Key in 99 at the maintenance prompt to exit to the date and time It should be now in ...
...mono start button until screen displays 'purge count'.Press 2783 to reset purge count.Press stop/exit keyPress 99The printer should return to normalORMachine offSwitch on the machine while holding ...
...Mono Start one by one, followed by up arrow key four times. this should all be done as short a time as possible, around 3 seconds. Enter maintenance mode 80, by pressing the up/down arrow key and set ...
Question about DCPJ125 All-In-One Inkjet Printer
START (Mono + Color) until it reaches the purge Press this order figures 2 Okay 7 Okay 8 ok 3 ok Wait until the value turn into zeros Press exit Press 9 Then 9 The printer will restart End -----------
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions