Questions & Answers for: model 1 0 50 Humidifiers

...model 50 relay. I need to know hoe to do that. white wire on fan motor ( neutral ) is placed under clamp on relay , one yellow wire on relay goes to one wire on the solenoid valve , other yellow wire ...

...50-60, when my desired temp is still 70. I have the owners manual, I have programed it many times now, I have done the "Hold temp" I have checked the furnace and I have checked my AM/PM time settings ...

...model 760. Thanks If you have 24 volts to the solenoid, then it's not the control card. It's either the solenoid or there's an orifice in the water line at the solenoid that sometimes stops up. To ...

...model SCM3502 cool most humidifier If your water is well water, more than likely that's the problem. To many minerals and iron. Try cleaning the humidifier with a 50/50 solution of white vinegar and ...

Model V5100NS - Nebulizer has heavy deposits from water. Attempts at cleaaning (with vinegar) has caused black coating to be removed, revealing rougher, gray surface below. mbethlinn, it sounds like ...

...model v188. works great, just wanting to clean it. Can't find my manual anywhere. The easiest ans simplest way to clean it, is too mix a 50/50 solution of White Vinegar & Bottled Distilled ...

...model 50 current sensing relay won't close aprilaire model 50 current sensing relay won't close If the relay is not closing then it must be replaced. It works by sensing the current ...

...50% water for an hour to dissolve mineral deposits and kill fungus, so the wick doesn't become too clogged to operate. I believe this lets it last a few times longer, but it is a Honeywell model of ...

...model 8 made by the F.C. Hunt Manufacturing Co. In Elizabeth,New, Jersey is it worth anything Not much. Most people want to buy new medical equipment / environmental control equipment if the original ...

...model, but it would suggest that the unit is unable to function due to either an electrical failure or needs a serious deep cleaning (esp.the part that interacts with the water to form mist.) I would ...