Questions & Answers for: mitsubishi lamp thermal sensor

Lamp Thermal sensor? Thanks for your help on my last problem. I had a 34 code and replaced the capacitors on the power board and I now have an image. Now I am getting the message "TV will shut down in

...mitsubishi medallion 1080 and when I plugged it back in the timer light flashes and will not stop remove the lamp and check to see if its ok, if ok replace lamp thermal sensor My timer light is ...

...lamp housing unscrew it and pull the thermal fuse up and it will come out install a new one then put it all back together. Once you remove the screw located but not attached at bottom of thermal ...

...lamp cage. Cleaning the filter may resolve the problem. It could also be that one, or both, of the temperature sensors could be defective. This is a known problem to the extent that Mitsubishi ...

Mitsubishi SL2u projector: Projector was recently dropped and now within 10 seconds from turning it on the Lamp - Temp indicators turn RED and the system shuts down. I suspect a thermal switch of some

lamp was from an authorized Mitsubishi dealer in a Phillips box with the bracket and everything. Mitsubishi wants me to buy a lamp directly from them which is the same thing for $100 more. Replace the

...Mitsubishi 73" TV model number WD-73735. The lamp went out, and I was finally able to spend the whopping $115 for the replacement. After installing the new lamp, we are still getting a blinking ...

...Mitsubishi WD-57732 TV. Where is it located? The thermal sensor is located on the lamp cartridge housing. here take a look at this link ...

...Mitsubishi and it still won't power on. Help!!! These tvs are known to have sensor issues. EX: door lamp sensor failure. Thermal fuse failure (above bulb)....Check all sensors on the tv and ...

how to change the thermal sensor on a mitsubishi wd-57731 tv There is a thermal fuse for the lamp--should be right on the lamp housing.