...mode. the mirror is problem of your camera,it alway been close that why the sensor is functioning properly cause that sensor is working in af mode....check the post at the side of the mirror if not ...
...mirror doesn't switch to night mode. Is there a fuse in the line that I could replace or is it time for a new mirror? Bruce I have had these mirrors apart and the problem is the little motor that ...
...mirror goes from day mode to night mode on its on, fluctuates back and forth as I drive. I have the rearview mirror with the digital compass and thermometer in it. it is defective, they are not ...
...mirror sticks Please check whether the mode dial is on 'Mup' or 'Lv'. If it is, then the camera is on mirror lock-up position (Mup) or LiveView mode (Lv). If any of these is selected, press the mode ...
Question about D300 Body Only Digital Camera
...mode (Lv). Mup is mirror lock-up and Lv is LiveView. It could be in Lv mode if you can see the image on the LCD, but not through the viewfinder. If it is on Mup mode, both the viewfinder and the LCD ...
which is "mirror" mode or "normal" mode. Choose the "mirror" mode, if you want to look at the cam yourself, just like looking at the mirror. Choose the "normal" mode, if you want to let others see you
...check the mirror home position sensor.To enter SIMULATION MODE press C, 0, reset key, C (press these four buttons as soon as posible. The display will go off then enter the SIM codes and press
...mirror is in lock up mode. That is used to clean the sensor(dangerous to do if not properly equipped!). Turn off power to camera to snap mirror back up and then you can switch to manual mode to shoot ...
mode. Use SIM 1-1 to check the mirror reciprocating operations. When the mirror does not feed. Check for disconnection of the scanner wire. Check the harness and the connector between the mirror motor
Question about AR-5316 Advanced Digital Imager Copier
...mirror mode or the inverse mode. To turn off mirror mode, you can follow these steps: Press the "Mode" button on your calculator. Use the arrow keys to select "Setup" and press the "OK" button. Use ...
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions