...microwave hooks onto the bottom of the mounting plate and you swing it up to the cabinet above it. Then you must screw 2 mounting screws through the floor of the cabinet above into the bracket on top ...
...mounting.There are four screw holes on the top of the microwave and I would like to know if I can simply use the existing mountin brackets and mount the microwave as is. The developer had a metal ...
Question about JVM1440 Microwave Oven
...microwave cabinet mounting screw is WB01X10180 (or AP3205964 or 942461 as listed on some repair parts sites). A set of three is GE's p/n WB01X10125 (or AP3185225 or 910236 as listed on some repair ...
mounting screws anywere. the microwave is a quasar mod.mq9968w. There should be screws in the cabinet floor ABOVE the microwave. Unscrew them, they will be long. Make sure you have someone to help you
...Microwave and the four holes for the mounting plate do not coincide with the two wall studs that are behind the microwave location. Can I sink a couple of extra lag screws through the mounting plate ...
mounting screws on kenmore microwave model 80592 to change filter or light bulb? The Grille mounting screws directly on top of the microwave 2x screws hold the vent to the frame. check out the picture
Question about 80599 Microwave Oven
mounting bracket behind the microwave. I would start with removing the vent cover (if there is one) and check for access to screws or bolts on the back side of the microwave. Make sure that you have a
...mounting screws.There are 2 or more screws in the cabinet floor above the microwave. Be ready to catch the microwave once the last screw is removed because it will drop in the front. Then lift the ...
Question about 63792 Microwave Oven
...mounting bracket that mounts to the wall and the microwave hooks into that and is held up by the two screws you referred to in your question. Unfortunately, you have not provided enough of the model ...
Question about 63792 Microwave Oven
mounting over the stove, counter microwave ovens they also include a wall support brackt that is fastened to the wall studs. After it is mounted correctly the microwave has special slots to accept the
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions