Maytag MMV5165BA Over The Range Microwave After cooking several minutes, the unit shuts down entirely (microwave, hood, light and display) and it takes about 30 Minutes to come back on. For example we
Microwave cuts out after 23 secs Microwave cuts out after 23 seconds on any program and goes back to clock display. Can re-set to run for an other 1 minute, but cuts out again at about 23 seconds and ...
Question about SMH7178STD Microwave Oven
Samsung Microwave. I put the time on 25 minutes and cut the microwave on and came back and have no power. I put the time on 25 minutes and cut the microwave on and came back and have no power. Chances
...cuts again Rob. Hi there, It could be either the magnetron thermostat or the cavity thermostat would be faulty, depending on the microwave but in most cases it would be a thermostat. First of all you ...
Question about KOR-63D5 Convection/Microwave Oven
Microwave shuts down after 1 1/2 minutes and then will start up after several minutes. Sounds like a Thermal overload cutting in make sure the Vents are clear not blocked in any way..to close to the ...
oster OM1201E0VG countertop microwave I bought this microwave in Oct 2011 and it has started shutting off after a few minutes of heating. The power shuts off completely. After about 5 minutes it ...
microwave is cutting off This microwave works when you first turn it on. Then it takes 10 or so minutes for it to cool down enough so it will restart. Is this a fixable problem or is the microwave ...
Question about Spacemaker JVM1640SJ Microwave Oven
The microwave keeps cutting out after 2 to 3 minutes and you have to wait 2 minutes for it to come back on again. We have cleaned it out thoroughly several times. It does not cut out when using the ...
Question about MCD1611ST Microwave Oven
Microwave would cut off after a few minutes and then turn back on but now there is no power at all. For the past few weeks if we use the microwave for more than a few minutes it would cut off. It ...
Question about MCD1611ST Microwave Oven
My Panasonic Microwave (NN-CF778s) locked itself with Error code H98. This happened when we had a power cut, there is no reason to think there is anything wrong with the microwave other than this. it ...
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions