Questions & Answers for: microwave blowing fuse

blowing. Please help me with this. I just replaced a dead fuse on a whirlpool microwave/over range. After I replaced it I noticed everyting works fine, fan, light, but when I turn on the microwave, it

...microwave. Keeps blowing 13amp plug fuse. i have this microwave that keeps on blowing 13amp fuses (plug). a loud pop occured. have changed the fuse, after two uses the same problem occurs. Any ideas ...

...microwave oven keeps blowing does the fuse in the plug blow or the internal fuse if it blows the internal fuse it could be one of the door switches two of the switches have a red button on them and ...

...fuse in microwave mode grill function ok microwave stopped working checked fuse had blown, replaced fuse tried microwave fuse blown immediately, replaced fuse again and tried all other fuctions ...

...design that can cause a blown fuse when the door is opened while the microwave is running - this is an intermittent fault, use the stop button before opening the door, this will stop the fuse

...KEEPS BLOWING THE FUSE INSIDE THE MICROWAVE WHEN I CHANGE THE FUSE IT WORKS FOR AWHILE THAN BLOWS AGAIN CHECK THE FUSE CORRECT AMPS OTHER WISE BLOWS THE FUSE AND CHECK ANY SHORT CIRCUIT IS ...

fuse for LG microwave LMV1813ST If too much current passes through the microwave circuitry, the line fuse will blow. If the line fuse blows, the microwave won't start. To determine if the line fuse is

...fuse blows, the microwave won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should ...

...microwave fuse? It was having issues and kept blowing my fuse. I kept resetting my fuse and it would work again. Now, nothing. Could it be a blown fuse inside the microwave that I need to replace If ...

...fuse. The microwave works for about 2 weeks and then blows the fuse again. What could be causing this? From what I have read on line, if a switch were the problem, the microwave would blow the fuse ...