Questions & Answers for: micro oven faults

Ad

Question about 30" Self-Cleaning Slide-In Gas Range - White

2 Answers

...oven door unlock time exceeded. Check wiring between eoc & door lock micro switch. more likely you need to replace the EOC PT NO 3148558 Kenmore Why do I have a blinking oven light on the clock ...

Ad

Question about FMV157GM Microwave Oven

1 Answer

...oven is OK does not come. Advise to check fault and also if micro ovens can be repaired for such faults. If so the rough cost , Size of oven around 30 lit HI, you will need to replace the heating ...

Ad

Question about FMV157GM Microwave Oven

2 Answers

...oven? If it is not-and only a micro then there is no heating element. Try it on micro(if its a combi) with a mug of water for approx 30 seconds to test it. If its a combi-is the micro function still ...

Question about KHMS155LSS 1000 Watts Microwave Oven

1 Answer

...micro wave stop working f-2 is on screen Possibly a keypad short or motherboard fault if it is a KitchenAid microwave. Beware if you have a KHMS155LSS model, a Keypad short can and will cause the ...

Question about B7740N0GB Microwave Oven

1 Answer

in neff micro/oven what is the fault precisely?is the fan not working?If so, you have to remove the fan carefully after opening the panels & removing its thimble connectors & replace it, Voila

Question about MC5694 Microwave Oven

1 Answer

my micro wave is not heating up Assuming the elects are ok. Could be a thermal cut off has gone or more serious the Magnatron,I suggest an engineer for both faults...

Question about MH7140XF Microwave Oven

1 Answer

...oven. This is normally located in the compartment where the micro control board is and requires you to removes it to acess it. These service sheets have fault codes and causes on them. If you are ...

Question about MMV1153A Microwave Oven

1 Answer

micro. never came back on Possible that during the power outage there was fault in the mains supply and with the oven being plugged on it is possible that the power supply or the main board is damaged

...automatically but not heating. Please note unit is 27 months old When you close the oven door, some micro switches are working. One of them is blocked. Check and replace the malfunctioning

ground. If it is a micro-circuit breaker that trips it indicates the circuit is consuming too much current - a short circuit. Either way the wiring or the oven elements have a fault and need attention

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Paul Carew

Level 3 Expert

3489 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you a Kitchen Ranges Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...