Questions & Answers for: mf 35

...35" keep blowing MX0841 and .1 fuse resistor I have replace the MX0841 IC and .1 fuse resistor with new one. After working for awhile, the MX0841 is shorted again and .1 fuse resistor are blown. Any ...

apex proyection 51 '' TV I found a capacitor bad. I replace this cap 35 volts 1000 mf but now do not star on. Off brand item. Sorry but you are on your own. No Tech support available.

...35 volt 22 Mf cap. These are located very near the STR 5041 regulator on a large heat sink. Have them replace the high voltage deflection cap that is about 200 volts at 1 Mf, near the flyback ...

...Mf), CX2110(35 volts 100Mf), C2104 (50 volts 1 Mf), resolder resistors RX2115, RX2116,R2118,R2119. You will need to also resolder the vertical IC. I think this IC location is IC 2200, its been ...

...35 volt at 220 Mf and 972 which is a 16 volt at 1000Mf. Be sure to use the 105 degree caps (high Temperature) in this unit. Hope this will help you in a fix. Thanks for asking and show all hands of ...

...tractor is available through Repair Manual Download at:http://www.repairmanualdownload.com/tractors/mf-35.phpIt's around $20 and its an immediate download as a PDF file. I hope this helps you

...35~80mm AF lens (works on N55 and F75) set to f/22 and fresh batteries (tried both new CR-2, correct polarity, and MB-17 with brand new AA alkalines). Problem: no AF, shutter release. If the AF/MF ...

...mf switch I have a Canon ef 17-35 f2.8 lens that is missing the AF/MF switch. I found the switch and would like to know how to put it on. It's an almost impossible task without taking apart the lens ...

...35 volt parts 680 mf replaced for 1000mf 82 mf for 100 mf
Thats all what is neccesary to repair the humax POWER SUPPLY


BUt if that your model is not 24 months old you will have ...

I have a 42 inch Olevia 237T12 LCD no picture or sound the 680 mf 35 v can they be replaced with 680 mf 25v ? No. You could use higher voltage caps but not lower.