Questions & Answers for: Harley Davidson FLSTF - FLSTFI Fat Boy how to take a meter reading

Question about 2004 FLSTF - FLSTFI Fat Boy

1 Answer

reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries. All voltage readings

Ad

Question about 2001 FLSTF - FLSTFI Fat Boy

1 Answer

...ridden for a long time to recharge the battery ,, with the post connections hooked up, use a volt meter to check the charging,, it should read between 13-15 volts ,, if not you have a regulator ...

Ad

Question about 2001 FLSTF - FLSTFI Fat Boy

1 Answer

...are two wires that connect to the coil, one is battery voltage, you connect to the other. Some meters need an additional part to 1/2 the signal, as stock fires all coils at all spark requests, ...

Question about 2001 FLSTF - FLSTFI Fat Boy

1 Answer

...meter reading to tell whether your battery is good or not. The battery will read 12 volts and still not have enough current to light a decent bulb on your bike. This is because the volt meter is ...

Question about 2002 FLSTF - FLSTFI Fat Boy

0 Answer

...need 12.5 volts or better after charging. 3. Hook up battery positive cable, then with your multimeter on the milliamp scale connect one lead to the negative battery post and the other lead to the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...