...the alternator, unplug the connection at the front of the engine. You'll need a digital volt ohm meter to test the alternator output. Put the meter in AC volts 50 volt scale. Touch the two pins ...
...looking at the starter circuit and relays? Need help! Not necessarily. Sometimes when using a volt meter, a circuit can play a trick on you. Let's take a points type ignition system on the points ...
...and you're running off the battery. Charge the battery fully and then connect a digital volt ohm meter to the battery. Red meter lead to positive, black meter lead to negative post. Put the
your battery MUST be fully charged to perform these test. You'll need a good DVOM (digital volt ohm meter) but an analog meter will work. Connect the meter across the battery with the read lead to the
...in the bike. Put a charger on it and charge overnight. Then you'll need a DVOM (Digital Volt Ohm Meter). Connect the meter across the battery by connecting the red lead to the positive post of the ...
...had a load test performed on the battery? Just because a battery reads 12 volts when using a volt meter doesn't tell you anything. You need to have the battery load tested. If it tests good, ...
...need 12.5 volts or better after charging. 3. Hook up battery positive cable, then with your multimeter on the milliamp scale connect one lead to the negative battery post and the other lead to the ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions