Questions & Answers for: GMC Envoy melt 5

HEADLIGHT LOW BEAMS BOTH RT & LT LOW BEAMS NOT WORKING. CHECKED FUSES AND LIGHTS BOTH ARE GOOD. check the wiring to the bulbs, mine melted.

WHERE TO GET NEW HEATER CONNECTOR THAT MELTED I HAVE A 2002 GMC PICKUP. THE HEATER FAN WOULD STOP AND GO AT DIFFERENT TIMES, SO I CHECKED IT OUT TO FIND THE PLUG HAS MELTED AND NEEDS TO BE REPLACED. ...

My seats stop wprking and the fuse is extreamly hot to the touch can you help check on the earthing of the seat if not properly earthed then the fuses will melt

...be found at auto stores or on Ebay. Look for ones with ceramic sockets, they will not overheat and melt. Make sure your headlight bulb contact pins are in good

I HAVE ENVOY2003 MI PROBLEM ITS, MY HET ONLY WORK IN THE NUMBER 5 you have a bad blower motor resistor it is located under the dash on the passenger side may have to remove a shield to see it has to ...

ac blower has no high speed changed resistor, can not find blower motor relay The relay is part of the resister, when you replaced he resister did you check the connector and make sure the connector ...

low beam headlights are not working replaced the relay Check fuse #6 in the underhood fuse panel, also check lamp sockets and wiring for melting.

2003 headlight wiring gets hot and goes open Ive replaced module that light bulb plugs into and the module gets so hot it melts the plastic and goes open When electrical items get hot there is ...

fan stop blowing FAN STOP BLOWING check fuse then check for voltage at blower resistor. if there is voltage replace resistor. also check the wires and plug going to resistor, make sure they are not ...

fan switcth replaced module still only works on high 2004 gmc envoy Make sure the pigtail isn't melted also, very common for the pigtail plastic to melt on the inside and short out. When replacing the