PEAVEY ECOUSTIC 112 W/ NO SOUND ----muted? Yesterday I was playing through my amp and it was working fine. I have had the "Pre-amp Out" jack in the back of the amp hooked up to my Behringer PA so that
Question about Allen and Heath WZ3144 14 into 4 Live Mixer with EQ and Inserts
where on a 16:2 allen heath wizard would you hook up a 482i sonic maximizer? The answer all depends on what you want to achieve. If you just want to enhance the sound of 1 or 2 instruments / voices ...
just a loud hum when turned on. Hum is always connected with the presence of AC interference into the signal path of the amplifier, which means the audio amplification is mixed with the ac ripples. So
Hey, I have a peavey 6505 112+, the channel switch is failing , when i press the jack input , i mean pushing it, it works, but when im not doing that, it just doenst switch from clean to lead. and its
can i go straight out of the pre out on my fender frontman into a powered mixer pa system yes,, Pre means before powered or amplified ,, so yes you can do this to a powered mixer, just be sure that ...
Question about Mg100dfx 100-Watt Combo Guitar Amplifier
Marshall MG100 MG DFX. Full speaker noise with all volume knobs turned to zero and on all settings. When the amp is switched on there is a horrible loud buzz/growl that can only be left on for a split
I'm plugging in an active speaker to aux 3 of my fx16ii, but it doesn't work. I have it set up the same as aux 1 and 2 where I'm also running active speakers (for monitors). Am I missing ...
Question about FX16ii 16Channel Audio Mixer
I am interested in buying a Korg C-56 for 100.00 but the seller says the pre-amp needs repair. What does that mean? The seller says it is well looked after and all the keys work correctly but I am ...
how to use an amp with the powerpod 820 mixer can i use the powerpod 820 as a pre amp with a stack head? or should i run from the "line out" on the head. and IN to the mixer? you always keep
Question about FX16ii 16Channel Audio Mixer
When switching between Clean/Crunch and OD 1+2 I find the Volume differences absolutely massive, I mean miles apart. It makes switching from a clean or mild crunch into the OD channels pretty much ...
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions