Questions & Answers for: mcu error 3

Ad

Question about Aculaser C1100 Printer

4 Answers

MCU�� LV/HVPSStep Check Yes No 1 Check of Photoconductor Unit attachment Re-attach Photoconductor Unit. Does the error recur when the power is turned ON? Go to Step [2]. End of procedure

Ad

Question about Duet GHW9150P Front Load Washer

1 Answer

...error CCU (control) and MCU (Motor Control) . Unplug washer or disconnect power. 2. Check wire harness connections to the MCU, the motor, and Central Control Unit (CCU). 3. Check the drive system for ...

Ad

Question about GHW9400SU Front Load Stacked Washer / Dryer

1 Answer

Error The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes. THIS PROBLEM IS DUE TO

Question about GHW9400SU Front Load Stacked Washer / Dryer

1 Answer

error. checked wiring connection from drive motor, mcu/ccu. i also checked the resistance on the motor between pins 12 23 13 and it was 6 ohms. ran test again same error code f6. the washer won't spin

Question about GHW9400SU Front Load Stacked Washer / Dryer

1 Answer

error(f-6) The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes. Potential Causes ?

Question about GHW9100L Front Load Washer

1 Answer

...error showing up 98% of the time on high spin; 70% of time on medium & low spin. Checked conections between MCU & CCU. Should I buy a new MCU or a new washer? No do the following: Check wire ...

Question about GHW9100L Front Load Washer

1 Answer

...Error The Central Control Unit has detected a short in the motor control unit. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes. Check wire harness connections ...

Question about GHW9100L Front Load Washer

1 Answer

...Error The Central Control Unit has detected a short in the motor control unit. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes. Potential Causes • Check wire ...

MCU) error The Central Control Unit has detected a short in the motor control unit. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes. Check wire harness connections

Question about Duet WFW9151YW 27" Front-Load Washer with 3.5 cu. ft. Capacity, 12 Wash Cycles, Cold Wash Cycle, EcoBoost/TumbleFresh Options and 3 Temperature Settings

1 Answer

...(MCU), and between the MCU and the Central Control Unit (CCU) • Check the Drive Motor • Check the MCU • Check the Wire Harness Replace failed component. Whirlpool Duet error f6 Google ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...