Questions & Answers for: maytag microwave keeps running

...Maytag 'Authorized' repair service has been out 2 times and keeps telling us the replacement parts are sabotaged, but the SAME PROBLEM is found. m Sabotaged??? What could they mean by that?? It could ...

...keeps opening and closing while fan is running We have the micro vented to the outside. Do we need to have the front vent operating? Since it is operating, is it supposed to open and close while fan ...

...Maytag microwave MMV5207 - we were using the Popcorn setting/sensor and opened the door in the middle of cooking. Now, when the door is closed, the microwave runs constantly (but I don't think it's ...

...microwave oven door, it starts to run, light off. No heat, just fan and plate move. We can program it to run, but still no heat, and when time expires, it just keeps running. Only opening door causes ...

...else. You might inquire online at Maytag or the Sears parts department to determine the cost of a replacement board but I suspect it will either not be available at all or cost 3/4 of a new

maytag mmv5165 microwave oven just started acting up. Whenyou close the door, the light stays on and the turntable moves, but the magnatron isn't running. I push the stop button, but it keeps "running

Maytag OTR Microwave oven that doesn't work. After I close the door and set the time and start, I see the time countdown, but I don't see the microwave starting. I can get the microwave to start, if I

...maytag microwave makes noise and has a burn smell If there is no heating please do not switch on unless you have confirmed the fault.The burning can be the magnetron or the capacitor. It is possible ...

My microwave just died this morning. Not a fuse, not the plug. It's only about 1 year old. Any suggestions? there is no heating please do not switch on unless you have confirmed the fault. It is ...

...maytag built in microwave MMV4205BAW from August 2006. The microwave runs but does not heat and makes a slight buzzing sound. It sounds like the magnetron needs to be replaced. If this is not under ...