Questions & Answers for: Cadillac Catera master key 4 0

key wont pull out with the batery hooked up only when i unhook the batery the key easly comes out this is a safety feature so that someone cant just run up to your car, turn the engine off and yank ...

Ad

Does the key have a chip or battery? My key is Does the key have a chip or battery? My key is not starting my car. You have a chip in the key., call locksmith or dealer.

Ad

...a special way to bleed the brake system on a 2001 catera Place a clean shop cloth beneath the brake master cylinder to prevent brake fluid spills. With the ignition OFF and the brakes cool, apply the ...

I lost my only key for my 2001 cadillac catera, how can I get a new one? You need to get an aftermarket coded key which can be cut by the serial number of the vehicle. You need to be a locksmith to ...

Question about 2000 Catera

1 Answer

abs light tc on and off cadillac catera i had the same problem along with cruise not working. had the abs control module taken off sent it to module masters shipping and repair with 5yr warranty $290.

Question about 1998 Catera

2 Answers

I bought a used 2001 cadillac catera, it only came with one key and since my wife and I drive both drive it we decided to have a duplicate key made. We bought the key and had the key programmed at an ...

...master key to be programmed · System LED will illuminate · After approximately 10 minutes system LED will switch OFF · Switch ignition OFF · Wait 5 seconds · Switch ignition ON · System LED will ...

Question about 1999 Catera

1 Answer

...Booster goes through the Fire Wall, Has a Rod on the Brake Pedal and has 4 Bolts holding the Brake Master Cylinder. Then the Brake Booster has 4 Nuts on the Inside of the Firewall. Don't forget to ...

...an issue with the brake system. Either the brake caliper not releasing on one wheel, or the brake master cylinder is not allowing the brake fluid to return to the reservoir. Front wheel drive car,

I put the wrong key in the ignition, now when I put the right key in, the ignition wont turn at all Try some WD -40 in the key hole. Spray a good bit in to remove any metal deposits. Did the wrong key

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...