Questions & Answers for: map sensor cutlass

Map Sensor Location Anyone know where to find the Map Sensor on a 1994 Olds Cutlass Supreme with a 3.4L DOHC motor? back of the intake please leave feed back thanks

map sensor circuit. maf--- mass air flow sensor map--- manifold absolute pressure.--- check the small vaccum hose from the map sensor to the source, could be brittle and leaking air. Have both the map

i solve code 33 on olds cutlass supreme? I believe this is the MAP sensor code. If so check your MAP sensor vacuum hoses and electrical connections at your ECM. You may need to replace your MAP sensor

...map sensor If it has a map sensor, it is held on by two screws and connected to the intake manifold with a vacuum tube. You would have a MAF sensor or mass air flow sensor on the 6 cylinder engine ...

...map sensor at idle if i give it gas then i do why ? YOU SHOULD HAVE VACUUM AT IDLE TO MAP SENSOR.WIDE OPEN THROTTLE VACUUM WILL DROP. SO YOU NEED CHECK AND REPLACE ALL VACUUM LINES ON INTAKE ...

...map sensor located on a 91 3.1 L cutlass supreme The map sensor is on a bracket between the firewall & the inside valve cover. It has a 3 wire plug on it & a vacuum hose that goes to it. Map ...

I've looked on the air hose between the air box and the throttle body but all that's on that hose is the IAT sensor. That year does not have a MAF sensor. It uses a MAP sensor instead

...test it 1998 olds cutlass Usually the map sensor is on top of the intake near the firewall. The sensor measures manifold vac. You would use a scanner to "watch" the sensor reading as the vac

...MAP sensor,voltage high, low vacuum indicated. Wiring short circuit to positive, hose blocked/leaking, MAP sensor, ECM Check the attached links, "I hope this helped you out, if so let me know by ...

...map sensor on a 1994 oldsmobile cutlass supreme 3.4 DOHC? trying to locate the map sensor for a 1994 oldsmobile cutlass supreme 3.4 DOHC. It's mounted in the right rear notch of the air intake by the ...