Questions & Answers for: malibu throttle position sensor

...Malibu Code PO122 problem fault code in the emission test and P0341 fault code in emssion test. po341 is camshaft position sensor A bank 1 ckt range/perf and po122 istps/pedal position sensor A ...

throttle position sensor ?? WHAT ABOUT THE THROTTLE POSITION SENSOR ? Where is it located,? What does it do ? More information please, thank you.

malibu wont idle/replaced sparkplugs 2-idle ssensors had coil pack checked out,ok/still wont idle whats up please? The throttle position sensor,and the idle air control valve would be my guess at this

...malibu need diag process both codes refer to the throttle position sensor, the sensor is at the throttle plate, on the side of the throttle body. to test remove the connector to sensor, use a ohms ...

...Malibu with a 2.4L engine model, using a Phillips screwdriver. 3 Locate the TP sensor on the throttle body. 4 Unplug the electrical connector from the throttle position sensor. 5 Unscrew the two ...

...malibu throtte sticks, cable is loose , spring seems to stick . If pushing in the accelerator more than half way will not stop accelerating even when releasing the pedal The throttle body needs ...

my car stall when i come to a stop code p0106 and p0121 throttle position sensor and MAP sensor, the throttle position can cause it to stall.

...throttle position sensor is located in a 2007 chevy malibu I believe, if it's a 2.2 ltr the sensor is built into the throttle body unit and you'll have to replace the whole Throttle body which cost ...

...throttle position sensor (TPS) is a sensor used to monitor the position of the throttle. If it goes bad (and they do sometimes) it will cause your check engine light to show up. I have never had ...

How do I change a throttle position sensor on a 2010 Chevy Malibu LT flex fuel? it will be a small sensor on the throttle body one screw holds it on