Questions & Answers for: machines density

copier konica 2223 trouble code P-26 what does this code mean? The problem is your toner density sensor, either your sensor is bad, someone reset p.m. count without running density reset mode. turn ...

emachine w3118 memory is it low density or high density memory? while the reason you want to know density might help to answer, if you are buying memory you only need to know it will work in your ...

...machines. Did you now a totaly compatible floppy with this old model and where i can buy it if possible in Europe. Thank you for help P.Borel Hello I beleave it uses a HD/DD type of disk Abbr. Floppy ...

Emachines T2240 Does this use high density or low density memory? Or does it matter? low density works alot more often then high density, HD is just cheaper and thats mostly why it't not compatible ...

fax prints to dark I have changer the toner to my fax machine and it still prints to dark density setting is at minimum and contrast setting is at minimum. I have no drivers for fax machine. what ...

I need a JU-253-403P floppy drive or equivalent Re: Panasonic JU-253-403P As far as I'm aware, this drive is a 720k DD floppy drive. As 720k drives are few and far in between, what are my options? I ...

machine status P-9 machine status P-9 what is this message? Black Imaging Unit failure ? All density readings taken from the density pattern produced on the Transfer Belt are 0.5 g/m2 (IDC Sensor ...

emachines w2925 - does this macine use low or high density mem chip. From what i have read low density have chips on both sides and high density have them on one side. I took the chip in the computer ...

I have a Ricoh Aficio 1013 that prints fine but copies are unclear and off The machine prints perfectly clear pages, but when making copies through either the doc feeder or on the glass, there is a ...

hallow sir,i have canon-ir-400 xerox machine,develop is 24-24-128 and density is 5 but copy is very light.please solve this problem when i done develop 16-16-116 and density 9 copy become dark.and ...