Questions & Answers for: lux 5000

have an electrolux canister 5000 lux - power nozzle not working Hi- The power nozzle is not working but the sidekick is working...any ideas of what to do? HAVE YOU TRIED PUSHING THE RED "RESET" BUTTON

Lux 5000 Vacuum will start and then shut off with hose installed. W/O hose it runs fine Hi, You have a blockage in the hose, Use broom handle or cane to remove it. http://dysonmanuals.llc.nu/ Chris.. ...

...Lux 5000. I was recently given an Electrolux Lux 5000 (without the manual), and I would like to read up on proper operation. Is a manual avaiable and, if so, how can I order one? Thanks. Here is the ...

...Lux 5000 refuses to run I bought new bags at Sears but my Lux 5000 just dies the moment I start it. The hose is completely clear. I cut the four sides out of the top of one of the bags and when I put ...

lux 5000 vacuum cord will not rewind it is pulled all the way out need to disassemble need to disassemble to repair cord rewind This rewind is not easy to work on, I rewound my Eureka with much ...

lux 5000 put in new bag but when i turn on the lux 5000 put in new bag but when i turn on the bag full light comes on and machine goes off will only run without hose attached It sounds like the valve ...

I have the lux 5000 what type of bag do I need Electrolux C type of bag. These usually come packages of 12. Available at any electrolux dealer or vac shop.

Lux 5000 Why do you need to get to the cord assembly? If the cord will not retract, tilt the vacuum to about a 45 degree angle and gently tug and release cord. It will usually retract. Due to problems

...for a Lux 5000 There's 2 of them. One that's exposed and one that's under the cover for the wiring. manual > ...

...from the handle of my vacuum?The airflow is blocked, and there is very little suction. Electrolux LUX 5000 its a much older model. Made by Electrolux. HOSE HANDLE REMOVAL ELECTROLUX CANISTER ...