Questions & Answers for: lug stud

1990 Sentra How it remove and replace lug studs on front wheel Daughter's boyfriend removed driver's side front wheel on 1990 Nissan Sentra coupe and did not retighten the lug nuts, so, the wheel came

Ad

Question about 1998 Trans

1 Answer

lug stud How to change a lug stud Here's another thought - if the stud isn't too badly stripped, you may be able to use a re-threading die to restore the threads. The thread type and size will depned ...

Ad

Lug Stud. Also purchase several Large Heavy Duty Washers that can fit on the the Lug Studs. Place the Lug Stud back into the Wheel Assembly from the Rear (Rotors) or from inside (Drums). Use High Temp

...break the plate. when replacing, just start stud from back by hand, then use a lug nut to pull it in tight. when tight replace tire! This won't work on the Intrigue - hub will have to come off.

...lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads. 2. Then slip the flat washers onto the lug stud followed by the ...

...lug stud through the wheel hub from behind so that the threaded end is facing out towards you and then put some grease on the threads. 2. Then slip the flat washers onto the lug stud followed by the ...

Question about 1999 Millenia

1 Answer

...lug stud(s) out of the wheel hub, use a punch or a drift that is a little smaller in diameter than the lug stud, and be sure that you do not pound on the flange itself, then you will need a lug nut ...

Question about 1994 Civic

1 Answer

lug stud(s) out of the wheel hub/flange, use a punch or a drift that is a little smaller in diameter than the lug stud, and be sure that you do not pound on the flange itself, then you will need a lug

Question about 1999 Voyager

2 Answers

lug nut are handy to draw the new stud in. *********** such as myself just put the wheel on and use the lugs and the lug wrench. note the lugs are tapered on the business end so if you use them with a

...replace hub because the other lugs could break. Try to turn the hub to different positions and see if you can make room behind to insert stud. I used the lug nut to tighten my stud when my lug ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...