Question about MICROLINE 280 Elite Matrix Printer
OKI MICROLINE 280 Elite Matrix... Problem HELLO. CAN YOU HELP ME? WHEN I PUT A NEW PAPER FOR PRINT IT DOSEN.T TAKE IT AND THE RIBBON DOSEN'T GO LEFT AND RIGHT LIKE IT USE TO DO. AN ALARM LED IS ON. ...
print fragmented documnts my ml3390 oki printer prints dipersed data but when we print self test it is ok. Step1 If you're setting up the printer or changing the toner or ink cartridge for the first ...
Oki ML395 printer, paper continues to feed When form feed is pressed, the paper will not stop feeding your paper feed sensor maybe stuck or a piece of paper could be stuck in the sensor.Hope this ...
Question about MICROLINE 320 Turbo Matrix Printer
Red alarm wording showing, what does that mean Hello, The Alarm light will come on if: 1) The printer is out of paper. 2) The paper is jammed. 3) The paper is too far to the right. (The paper must ...
Question about MICROLINE 320 Turbo Matrix Printer
the paper feeder rollers are slipping and the paper is not feeding properly. What can I do to fix this? This is a good workhorse printer -- I serviced these for many years. You can try cleaning the ...
...be sure to remove it before installing rear-feed paper. 1 Lock Lever 2 Upper Tractor Cover 3 Pins 4 Lower Tractor Cover 32T-26.eps 1 Move the paper lever to the position marked "REAR." 32T-11.eps 2 ...
my printer looks fine but my computer says " out of paper" the way the computer will say that the printer is out of paper, is because the printer is telling the computer it is out of paper. ...
documents wont feed If not using track feed paper this printer should have a setting for paper height. If its set too high the rollers wont grab the paper. Also look for any paper that might be jammed
machine stopped - alarm light flashing machine working fine, then just stopped, "alarm" light flashing, turned machine off and back on, unplugged and re-plugged power cord - still ...
how to fix paper low error? Load it with paper and see what happens - if still get message then there is a problem with the paper sensor.
Usually answered in minutes!
259 Questions
49 Questions
51 Questions
17 Questions
20 Questions