Question about Spider Iii 15 Modeling Guitar Amplifier 15 Watt
loud buzzing coming over the amp. Nothing but loud buzzing coming over the amp when trying to play. Any suggestions? If the buzz disappears when you unplug the cable from the amp. check your cable. If
Question about Spider Iii 15 Modeling Guitar Amplifier 15 Watt
...buzzing sound in my amplifier, irrespective of whether the guitar is connected or not. Make sure you have a ground prong on your power cord. Most input jacks nowadays are closed circuit. They have a ...
I play Gibson USA Sgs, one with 490/498 humbuckers and one with 57classics....The Amp has a loud buzz like feedback all the time on the overdrive channel. If the amp is quiet with cables unplugged at ...
...loud buzzing sound over the music..completely distorted. i use traktor le with it and it works fine when i choose the audio device as "realtek" but only on my computer...if i choose" ...
...this new). The amp probably will have a slight buzz with nothing connected... the question is how loud it is. If you can hear it loud at five feet, that is too much. If you bought this used,
Question about Ultrabass Bxl3000
...loud buzzing sound. The Guitar signal stil goes through, but it's hard to hear over the buzz. I checked out that pre-amp test, and the guitar signal indeed came out of the headphone jack with ...
amp just buzzes when turned on when i turn it on it buzzes loudly and thats it Is it a valve amp? It could be valves are old. If not, try plugging it into some other outlet.
only buzzes pedal turns on but just makes a loud buzzing noise. cant hear any guitar at all Sounds like a classic ground-loop issue. Sound-on-Sound had a great article some time back that may help you
...loud buzzing Most Amps will buzz or hum when there is a bad ground. It could be because you're plugged into an outlet with some other piece of equipment on it like a motor. if it buzzes on every ...
Question about Ultrabass Bxl3000
loud humming/buzzing sound with a flange effect. Works no problem through the AUX inout, but that defeats the purpose You have a bad ground somewhere. Try different cables and check the effect channel
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions