Questions & Answers for: loosing water

losing water from radiator but no traces found losing water such that you add 2litres daily If you say no traces that tells me that you have most likely checked out your radiator well for no leaks. 2)

Ad

Question about 1995 Sidekick

1 Answer

water pump leak at weep hole This means the inner water pump seal has failed and you will continue to loose coolant. It has probably failed because the water pump bearings are worn and now the shaft ...

Ad

Question about 1995 Sidekick

1 Answer

...loosing time I've taken it to a jewellers and they said if they replace the batteryit will loose its water resistance...it looses about 20 a monthand it dont help when i pick the wife up late!!! ask ...

Question about 50 Gallon FVR NATGAS Water Heater 6YR 22V50F1

1 Answer

leaking relief valve on hot water tank It is 3/4 threads and it can be replaced any hardware store should have one. It may require a pipe wrench to break loose. they do go bad from time to time. Shut ...

Question about 1999 Silverado 1500

1 Answer

heater blows hot then starts cooling down Sounds like a plugged heater core or weak water pump.  Take the heater hose loose from thermostat area and the other hose loose from water pump inlet,and

there is slack in the belt around the water pump and the thing that the water pump sits on is really loose someone told me the bands in the water pump have gone out is there any way to fix that ...

loosing water by the waterpump and the hose where the water pump and hose are connected I keep loosing water to the point I have to constantly add water Check for ruptured hose or loose clamps. If ...

radiator is leaking from top,does loose cap causes lost of water radiator is losing water from the top yes the cap has to be tight it will loose water or a crack in it or the overflow tube by the cap ...

Question about 2000 323i

1 Answer

Loosing Water still loosing water from my shogun have had new head gasket andradiator top hoses still loosing water what else could be problem water pump seal. core plug on the engine poped out or ...

the part for the hot water is loose the part that you push to get hot water is loose look for a set screw - usually requires a small allen wrench

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...