Questions & Answers for: loosen power steering pump 1993

Question about 1993 Cherokee Country

1 Answer

...power stering pump with a diagram please? thank you rudy Loosen 2 pivot bolts on back of pump, 13mm. then loose one bolt on bottom/front. Turn adjustment bolt on right side/bottom of pump to loosen ...

Ad

Question about 1993 Wrangler

2 Answers

...Loosen top and bottom front bolts on Power Steering pump. Belt Tension adjust in just under and to the right of power steering pump. Remove air cleaner for easy access, and turn clockwise to loosen ...

Ad

Question about 1990 Safari

1 Answer

...power steering pump assembly, do NOT fully tighten the mounting bolts at this time, since you will just have to loosen them again for belt installation and adjustment. Install the pump pulley using ...

...you have to remove the outside belt? If so how is that belt removed? JUST LOOSEN THE BOLTS OF THE POWER STEERING PUMP TAKE OUT THE BELT FOR THE PUMP THEN REPLACE THE ALTERNATOR BELT AND STEERING

...then there is a long 1/2" bolt that you must loosen until the pump starts lowering and you can get the belt off. The power steering pump pivote up and down to change the belt instead of a

...the power steering pump is used as the tensioner. there should be 2 or 3 slotted bolts to loosen, and an adjuster in behind. 89 tensioner is on the power steering pump ,slacken power steering ...

...power steering pump assembly, do NOT fully tighten the mounting bolts at this time, since you will just have to loosen them again for belt installation and adjustment. Install the pump pulley using ...

Question about 1989 Safari

1 Answer

...power steering pump. You're right! The bolt that loosens and tightens the pump (after you loosen the bolts that allow the pump to move) is under the pump. there is often another bolt that locks it ...

...power steering fluid in a 1993 mazda mx3 power steering pump located on front left of engine bay by the the cap should say power steering on it it is a little to the left of coolant fill and should ...

...Power Steering Pump. How do I get to it? I've been told to remove the pulley on the ps pump but have been also told not to remove the pulley and 4 bolts will allow you to swing it out of the way. I ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...