Questions & Answers for: loose strut

...loose center nut on strut tower(may be covered with a circular rubber cover) If nut spin around with out getting loose use vise grips to hold strut rod ONLY TO REMOVE STRUT NOT TO INSTALL. if you use ...

...strut to see if it is loose. The struts should not be loose, but you never know. As the strut is certainly ivnolved in bumps and rotates when the wheel turns, I would check there since you have ...

...loose struts but could not find any. everytime I go over a bumb it makes loud noise. It is there a low or high speed it is quite possible that you have a bad strut mount, noticeable by rubber moving ...

...noise. I just got new rims, and tires. it sounds like something is loose.. noisy over bumps like a loose bolt.. could this be struts strut bushing, it sits on top of the strut and it is probibly ...

...strut mounts loose, take the lower strut mounts loose.  Depending on what kind of vehicle we are talking about, you may need to disconnect a lower ball joint, a brake hose from the strut, or ...

...loose. I took them out again and they look fine. Is there some sort of alignment I should be concerned about. They sound as if they are going to fall out but they are in there nice and tight. Thanks ...

strut mount bolt loose How can I remove my strut mount bolt so I can replace the upper strut mounting plate with a new one, I have tried to use a impact gun with no use. There are two options to fix ...

...nut is loose - axle bearing has collapsed (that would be noisy) - front knuckle ball joint has failed - suspension strut to knuckle bolts (two) are loose - strut upper mounting has failed or is ...

...strut and spring decides to pop loose your legs and face are protected tire will save u safty if first Crack the wheel nuts just loose, raise car and support on safety stands, remove road ...

...loose axle joint A rattle-type noise from the right front corner of the vehicle could be many things. Rattle-type noises are generally associated with suspension component failures, so if the noise ...