Questions & Answers for: loose stitching Vacuums

Ad

Question about Vacuums

1 Answer

The botom stitch is gumming up. Works for 3 or 4 stitches, then the stitch is loose and my bobbin case is full of excess thread. I have to stop and cut the thread away from needle and bobbin case. I ...

Ad

...plugged in the sewing machine and started sewing, just to see that the bottom stitch is completely loose. It's making this loose loops instead of stitches? I didn't change a knob or anything from ...

Ad

Question about Vacuums

1 Answer

AS I AM SEWING THE THREAD COMING FROM THE BOBBIN CASE IS THROWING OUT LONG LOOSE LOOPS ON THE UNDERSIDE OF THE FABRIC, THEEREFOR THAT DOES NOT CREATE A REAL LINE OF STICHES (VERY LOOSE AND NOT REALLY ...

...job and material. Jamming up in the bobbin area would most likely be from the top tension being too loose but also make sure the material isn't getting pulled down in by stretching it with an ...

Question about Singer Vacuums

1 Answer

...drop the bobbin down towards the floor a bit. (If it just pulls out right to the floor it is too loose). Most bobbin tension is tightened by a small screw on the bobbin case near where the thread ...

Question about Vacuums

1 Answer

...stitching is quite good but the underneath is loose. I have the tension on 4 and have a new straight needle and good quality thread. the underneath or bobbin thread is almost not catching. If the ...

Question about Singer Vacuums

1 Answer

...stitching is all knotted up! It's driving me crazy! I have tried everything. Any help would be greatly appreciated. Jennie The bottom side is effected by the TOP tension. First make sure the top ...

loose stitches tention loose long stitches, what should the setting be for straight stitches? for a 7318 model janome Thread tension is more dependent on what you are sewing than machine model. Upper ...

Question about Singer Vacuums

1 Answer

...tight bottom all over the place Hi. Loose stitching underneath means you need to increase the upper tension. Try just a little at a time, using scrap fabric of similar weight to what you want to

Question about Vacuums

1 Answer

empisal dress maker 270d Hi I'm using an Empisal 270D dress maker. I was busy sewing a onesie when suddenly my stitches started skipping badly or loosely. I've tried re-threading, playing around with ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...