Questions & Answers for: loose stitching Clothing Accessories

BOTTOM STITCH IS ALWAYS LOOSE CONSEW CN2053R THE TOP STITCH LOOKS FINE BUT WHEN YOU FLIP IT OVER THE FABRIC AND LOOK AT THE BOTTOM STITCH IT IS LOOSE LIKE LITTLE LOOPS INSTEAD OF TIGHT STITCHS. I HAVE

...a screw on the bobbin case (where you put the cotton for the underside stitching) which was very loose. I tightened it and that created more tension for the bottom thread which solved the

how do I adjust the bottom thread the stitches are too loose? if stitches on top is loose then remove bobbin case and tighten small screw on it. if stitches on bottom of fabric is loose then tighten ...

the stitch is out of adjustment.top stitch is too loose Check the upper tension unit for loose threads or fluff. This causes the discs not to completely close when the presser foot is lowered. If the ...

the underneath stitches are loose When you see loose stitches underneath your sewing, it usually means that the top tension needs tightening. Write down where your tension disk is before you turn to a

...with loose stitching underneath fabric Straight stitching is fine but missing almost every other stitch on zig-zag leaving a long loose pattern. try changing the needleadjust the top tension if ...

Loose bottom stitches on Singer 1507 The top stitches seem ok, the bottom stitches at very loose. Adjusted the bobbin tension to high, no help. top tension must be adjusted to fix loose stitches of ...

...be fixed? Suggest you do rethreading ,then test the stitches on straight stitch. If top stitches is loose you have to reduce the upper thread tension, if the bottom stitches is loose you have to ...

...loose under my work can you please tell me what to do thank you Use a brand new needle that is best suited for the thread weight and type of fabric you are stitching. All About Needles Be sure that ...

How do I fix loose stitches without having to start over?Loose on the left hand border. I now how 6 by 4 foot . Just learned how to crochet 3 weeks ago by watching a video. Help !! There is no way to ...