Questions & Answers for: Husqvarna loose stitching

Ad

Question about Husqvarna Sewing Machines

1 Answer

bobbin sewing loose boobin is sewing loose and bunching up...it has been working fine until this started just use straight sewing stitch nothing fancy at all hi there, there is a problem on tension ...

Ad

the stitch is out of adjustment.top stitch is too loose Check the upper tension unit for loose threads or fluff. This causes the discs not to completely close when the presser foot is lowered. If the ...

Ad

Viking 1: where is the bobbin control, my bobbin is loose... Where is the bobbin control my bobbin is loose The bobbin spool is loose, the bobbin case is loose or the bobbin stitches are loose?????? ...

Question about Viking 1

1 Answer

...over and over but still I have troubles. Is this a timing problem? If your bottom stitches are loose or loopy, it's probably because the upper tension is too loose. Make sure you adjust the ...

Question about Viking 1

1 Answer

...loose stitching on the underside. Generally if you have loose threads underneath, its the top tension and visa versa. However, if you are using a thread heavier than normal sewing thread through the ...

...bunch up and the "x" stitches back up into the previous satin stitches. Have tried loosening the tension with no success. I'd appreciate anyone's help! Thank ...

Question about Viking 1

1 Answer

loose stitches underneath try adjusting the top thread tension one number or letter higher sewing on a scrap piece of fabric till stitches look normal

Husquvarna sewing machine Lower thread too loose Stitching --lower thread too loose try adjusting the top thread tension one number higher till the stitch looks normal

...select any stitches from the control panel. Does this mean the motherboard is faulty? possibly, but loose cables or a bad touch panel are other among other ...

Question about Freesia 415

1 Answer

...that you're sewing on. A cotton fabric should have medium tension...but a heavy wool would need a looser tension. Best way to get the tension right is to take a few stitches, then look at the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machine Experts

radcal

Level 2 Expert

196 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

sewcrazyshan

Level 1 Expert

19 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...