Questions & Answers for: Baby Lock loose stitching

...I'm sewing with streatch velvet, and the stitches are off the fabric, or the loopers are too loose. I tried tighting the looper thread fine tuning screw, adjusting the stitch length and width. ...

...loose mid-stitching I am trying to embroider - just simple letters - the embroidery needle keeps coming loose during stitching. I am wondering if I need to adjust settings - I am trying to use a ...

...with the 4 thread stitch and now  cannot get the seam stitch to be firm enough ( seam is loose and looks like a ladder).  Please can you tell me What are the factory settings for ...

sews small stitches on the top and loose stitches underneath from the bobbin. change needle change your stitch length dial to a number higher like if it on 3 change it to 4 or 5 change the tension to ...

...you tried changing the needle?clean under the needle plate & in the bobbin area for lint or loose threadsalso check the top ...

underneath of quilt the stitches are long with smaller topstitches is my top tension to loose or too tight YOur top thread is looping, right? Re-thread your top thread, making sure you floss it into ...

baby lock quest My BLQ2 is making loose stitches when I sew a longer stitch or if I sew faster. I've changed needles and it still does it. Now it does it all the time.... The top thread is looping ...

...on baby lock Grace Sounds like a machine gun. Won't sew just makes that noise. But if I pull thread loose it will sew and the bottom stitch is loose and messy. try adjusting the top thread ...

It has not done this with the other exact same items I have embroidered Your tension on top can be loosened. If this causes your stitch to be too loose then tighten your bobbin tension. Just think of

PRO LINE BABY LOCK SERGER, BOTTOM LOOP TOO LOOSE. Make sure the lower looper thread is seated properly in the tension disk. (RAISE the presser foot. Grasp the thread between the thread tree and the ...