Questions & Answers for: loose stitch

...stitch is loose, then you need to tighten the bobbin tension: if the bottom stitch is loose, tighten the top tension. Hope this helps. It could also be the size needle and thread you are using for a ...

stitch properly. the top stitches are too tight while the bottom stitches are all loose, forming little loops. Is there anything I can adjust to sort this out? Thank you Cath Graham I found a screw on

how do I adjust the bottom thread the stitches are too loose? if stitches on top is loose then remove bobbin case and tighten small screw on it. if stitches on bottom of fabric is loose then tighten ...

...stitch is too loose Check the upper tension unit for loose threads or fluff. This causes the discs not to completely close when the presser foot is lowered. If the stitches are loose on top it could ...

the underneath stitches are loose When you see loose stitches underneath your sewing, it usually means that the top tension needs tightening. Write down where your tension disk is before you turn to a

...with loose stitching underneath fabric Straight stitching is fine but missing almost every other stitch on zig-zag leaving a long loose pattern. try changing the needleadjust the top tension if ...

Loose bottom stitches on Singer 1507 The top stitches seem ok, the bottom stitches at very loose. Adjusted the bobbin tension to high, no help. top tension must be adjusted to fix loose stitches of ...

...stitch. If top stitches is loose you have to reduce the upper thread tension, if the bottom stitches is loose you have to increase the upper thread tension. Adjust accordingly till you can get a ...

disney embroidary pe18od loose stitches under work what am i doing wrong my machine is the disney pe180d embroidary stitches are very loose under my work can you please tell me what to do thank you ...

How do I fix loose stitches without having to start over?Loose on the left hand border. I now how 6 by 4 foot . Just learned how to crochet 3 weeks ago by watching a video. Help !! There is no way to ...