Questions & Answers for: loose cable connection

...it when hooked to cable or satelite. it sounds me that it is due to cable wire connection where it is connected is probably might be loose or if you have cable box there is some loose

...cable might be loose or defectivr. loose connection or print break near tuner & tuner itself. loose contact or print break near VIF section supply or any components loose. hope this will help good ...

loose cable connection plug my tv's cable connection must be loose because the cable keeps going off as if there is not attena or cable hooked up.; Can that be fixed ? as this stv has a really good ...

...cable box. Could it be a loose connection. Sounds like you are using a component cable(red,green,blue) rather than an HDMI cable. Component cables are fine to use but if one of the 3 cables is ...

...loose cable end. You have to have a good ground to the engine block and to the frame of the car, Check the cables, check the connection to the battery, check for the ground straps to the block and to ...

...ignition Probably dirty or loose battery cable connections or loose fround wire. Take the battery cables off, clean them and tighten them. Check the negative cable ground, and the starter

loose cable connection on the battery.With a loose connection,you might be able to start the car,but it may not be able to charge properly.If the cable is tight,check for a loose belt and make sure it

...at the plug end check wether it switches off when you move the cable near the plug end.if it switches off the loose wire is in the plug if it does not the try the moving the cable nearer the Iron

...cable connections loose,or cables connected to wrong cylinders. 5. Ignition timing incorrect due to faulty ignition coil, ignition module, CKP, CMP, MAP, or BAS sensor For a primary suspect please ...

TV picture is jiggling on some channels so do we need to replace cable or what do we do? possible loose connection or bad cable Loose or corroded connections at cable attachment is a possibility.