Questions & Answers for: Singer loops bottom stitch

Question about 6038 Mechanical Sewing Machine

1 Answer

loops on bottom stitch my machine has been sitting for awhile ,i tried to do a small project but my top stitch is fine ,but my bottom stitch has big loops,changed my needle ,still the same ,if you can

Ad

...loosens; the bobbin tensioner is a tiny screw on the bobbin holder adjust both tensioners until your stich loops' both top and, bottom are tight but, the machine does not break the ...

Ad

Question about Featherweight II 117

1 Answer

several times and no luck. The bottom stitches are loose and loopy. What should I do to fix the problem? FYI.. Loops on the bottom, problem is on the top.. Loops on the top, broblem is with the bobbin

Question about 8280 Mechanical Sewing Machine

1 Answer

...is threaded right. If it pulls easily, you need to chead the thread thru the tension wheel. Kelley Rule of thumb. Loops on the bottom, problem on the top. Loops on the top, problem is on the

Question about 7462 Mechanical Sewing Machine

1 Answer

...bottom of the material has loops where the stitch should be i have a singer 7462 touch n sew ive made about fourty quilts on it and it's never had a problem before the stitches were perfect i know ...

Question about 5050 Mechanical Sewing Machine

1 Answer

...bottom stitch. I will sew and every in or sew the bottom stitch will loop. I have tried changing the bobbin and adjusting tension. what could be the problem have you check your needle to see if it's ...

Question about 14SH654

1 Answer

...bottom looper numbers up a little to make those threads tighter. Each fabric behaves differently depending on its "hand" so the right stitch settings do vary, ie. organza is different to heavy weight ...

Question about 8763 Curvy

1 Answer

...forget when you are sewing thicker fabrics. Barring that it sounds like your tensions need to be adjusted. Try to remember "loops on bottom... tighten top tensions" "Loops on top, loosen top

...bottom thread is tight there should also be loops on top and this means that the upper tension is too tight. Get out your manual (http://www.singerco.com/uploads/download/1198_8763-efs.pdf) and turn ...

...stitch top and bottom. Be sure presser foot (embroidery foot) is fully lowered or tension discs will not fully mate. There should be notable difference in tension with foot up verses foot down as you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machine Experts

Cindy Wells

Level 3 Expert

6688 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...