...loops on the bottom, wind the thread around the bobbin winder thread guide once for more tension and then thread it normally. If you do this, lower the tension to 5, test sew and then tighten the ...
...bottom stitch I have a new home model L-372 that I used for almost 10 years. It was stitching perfectly and then all of a sudden the bottom stitching is not picking up. The bottom stitching just ...
bottom tensions. Ensure that all is clean and free of lint and jams, this is the most likely cause....now for tension troubleshooting ....... This solution is for tension problems...if you cannot form
...the top stitch is looping on the bottom. Are these setting incorrect and if so what should they be on? dial above needle would be top tension, turn to 5. stitch length would need to be on 2.5 or ...
...loops on the bottom means top thread isn't getting tension. Re-thread top thread with presser foot UP. Then test your seam again. If you still have loops, tighten the UPPER ...
...bottom thread is looping. Rethreaded,, new needle,thread, bobbin,cleaned checked tensions, tried to clean upper discs where thread goes through. Stumped. Had for over 15 years. Sounds like the timing ...
Usually answered in minutes!
52 Questions
38 Questions
29 Questions
31 Questions
25 Questions
