...stitch tension problem... My sewing machine is either pulling the bottom thread straight and the top thread is looped, (so that it gathers when you pull the bottom thread) or the top thread is pulled ...
...bottom stitch is big loops. I have the euro-pro 9120. Have rethreaded and removed and replaced bobbin several times but problem continues. HELP!!! Loose bottom stitches mean the UPPER tension has a ...
Question about Denim Sewlution 380 Mechanical Sewing Machine
I have a Euro Pro 1262D -just had it tuned but I cannot stop the top thread from looping on bottom of fabric. Even though it catches the bobbin thread at the very start of stitching- there is no ...
...Loops on the bottom of the fabric means you need to tighten(increase) your top tension. If you're stitches on the bottom are causingpuckering, then you need to loosen you're top tension. For ...
...loops on bottom of cloth====Tighten top tension 3.Bobbin placed in case incorrectly===remove and replace 4.Bobbin thread slipped from under====check threading of ...
...stitch. If you put the fabric under the foot and step on the foot pedal, it looks like you have stitches. When you remove the fabric from the the machine, the stitches come off the fabric( top and ...
Question about 373 Mechanical Sewing Machine
bottom thread seems to not get caught by the needle and I end up with really long stitches instead of even ones. Any ideas what could be wrong? I'd really appreciate the help! Oh, this may be relevant
Question about Shark Mini Mechanical Sewing Machine
...bottom and pulls tight on he top Hi there, I would start by re winding your bobbin and making sure that it is done though all the correct tension loops. A bobbin that is wound to tight or loose can ...
...bottom bobin thread Be sure you leave a 3-4" tail on the bobbin when you insert it. Hold the end of the top thread, turn the fly wheel toward you until the needle goes down into the bobbin, grabs the ...
Question about Fast and Easy 420 Mechanical Sewing Machine
sewng machine fails to loop on bottom bobbin machine fails to loop thread on bottom bobbin There are several possible causes for this problem.Simplest first. 1) The machine has sat in the closet for ...
Usually answered in minutes!
132 Questions
105 Questions
58 Questions
66 Questions
64 Questions