...5 months waiting for new sump but before this it was running sweet. been told its a short in the loom but not so sure, please help...... Sounds like it is a short. Start checking all your main ...
Question about 2003 GSX-R 1000
...will be greatly appreciated! Thanks in advance. Most of the safety systems use a diode pack in the loom to stop clutch and side stand switch etc from back feeding each other. Maybe this has failed. ...
cant find wiring loom to buy I would take a look a ebay for spares. There are many dealers with ebay shops.
the wiring loom is in a mess nead a compleat loom for a 1987 gsx750h model cant find one anywhere hiya found this on ebay ...
...i would love to make this work and save some money. CHECK WITH AGENT MATE SOME NEED THE SAME YEAR LOOM AS THE BIKE HAD THIS twIT WITH A SV 650 had to be a 2004 loom went through 4 due to ?ick heads ...
...up they flicker again and I get a spark at the ground. Assuming all wire harnesses are stock and loomed from the factory it sounds like a frayed power wire making contact to your frame somewhere. ...
...to be in tact but i just dont know where it rans or what is what please help me?!? very basic loom , if you lay it over the bike then offer up the same colour connections to parts fitted to the ...
Question about 1997 RF 900 RV
...like the wiring harness could have a damaged wire. one of the most common places is where the loom comes out of the headstock. Check the harness for signs of wear. It can't be the main fuse if, ...
...power going to the handlebar switch as the connections often get bunged up. Fiddle around with the loom for a bad connection, then maybe the flasher relay (small silver coloured box with spade ...
Question about 2005 Boulevard C50
...do I start looking to fix this issue? There's a short somewhere, most likely suspect is the wiring loom chaffing against the frame when you turn the handlebars. Take the fuel tank & seat off, ...
Usually answered in minutes!
329 Questions
228 Questions
165 Questions
158 Questions
169 Questions