Questions & Answers for: long tractor

...schebel usx 49sl - should i fix it, or replace it? trying to determine if there is alternative carb for this tractor. there should be no reason why you can't rebuild it,as long as casing isn't ...

...tractor now attach a come-a-long to the free end of the spring and using the come-a-long stretch out the spring until it is longer then you need it to attach to the other spot it fits on the tractor, ...

...13.8 A tractor is a long time running machine and it does not need a high voltage setting. If it still has the original 6 volt system 6.3 to 6.9 volts will keep it running a long time to come. r/ ...

...filter on my model 917.271910 craftsman tractor Down on lower left side of motor is a pipe nipple about 2 inches long with a black plastic cap . Half twist it by fingers and pull off.Oil should

...Long 2510 Tractor (1985 model -I think) and am having a problem with the hydraulic lift. Problem: The lift will only lift approx. 1 foot high. I have changed the hydraulic fluid and filter, and still ...

one long flash one shortflash five flash? 4310 one long flash one shortflash five flash? 4310 I need to no where the wires go from my 15.5 h.p.kohler command charging system to the battery

...tractor's model and serial numbers. The deck drive belt is easy to change by releasing spring pressure on the idler pulley (usually under a plastic cover). See the user's or service manual for ...

...Tractor model #917258880 check this page for a vague routing. as long as your pulleys are still in tact, should ...

...tractor model 917274951. will a model 486248531 snowblower fit? I have the clutch idler assembly in place but the belt is too long. I know that I need different brackets for the front but I'm ...

Long 460 tractor. Rear hydrauliclift does not work. https://tractorpoint.com/forum/long-tractor-review/194898/1/Long-460-hydraulic-question.html This is a thread that talks about hydraulic problems on