Anti lock brake light on I have a 1997 Chevy S10 pickup with anti lock brakes and I just changed the two front rotors and I made sure that the new rotors were for anti lock brakes, but now my anti ...
Question about 2000 Passat 4Motion
I have a 2000 Passat and going to have my friend replace the rotors and breaks. I am preparing to fix it but want to know what sizes are the bolts for the calipers sliding pins. If you know the Bolt s
Question about Freezer 20.3 cu. ft. Frost Free Upright Freezer
...locked rotor condition and bad starting components you will not be able to tell until you replace the bad starting components and test run. if it hums and draws lots of amps its locked rotor. most ...
Cannot remove front rotor. Caliper and pads Cannot remove front rotor. Caliper and pads removed.6 bolts holding rotor removed. How do I loosen hub assembly? Raise vehicle and remove wheels. Disconnect
locked up. The rotor is cracked, could that be causing the problem. It also has Automatic Locking Hub - could it be locked up. I tried backing it up, like the manual says to see if it would unlock but
How do you remove the Hub and Rotor on a 97' F250 with Auto 4 wheel drive? I can not get the rotor to come off. I know that the hub must come with it. However, I am not sure what I have not removed in
...locked rotor current , generally it is located on compressors name plate, when ever pistons locked at a particular position the rotor does not move further at the time rotor draws large current, that ...
what is L.R.A. for a samsung SK1A1C-L2W ? A rule of thumb for lock rotor amps is 5 times the running load amps. That unit probably draws 3-4 amps max when running so lock rotor probably 15- 20. If its
gw511 Machine will not start washing . It beeps and lights one and seven are on. Also the lid no longer locks. Can the lid lock be bypassed? Your lid will not lock will this Error code. 130. (10000010
Question about 2007 Chevrolet Equinox LT
Rotors locking up after new brakes, rotors, calipers and brand new hoses rotors only lock up because the brake fluid has no where to return to when it gets hot Problem most likely in the master ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions