...washer. It shows LOC on the indicator. How do I fix it? Ok, press Options and Select at the same time and hold for 10 seconds until "LOC" is no longer displayed. Your control lock was
Question about GLTF2940E Gallery 3.5 Cu. Ft. King Size Front Loading Washer
...LOC codes. Suddenly, my washer displays like in is in a wash cycle. The lights are on, but it does not start. I push cancel button, and it beeps 3 times and displays 'err' then 'LOC', then time left ...
...washer, press Options and Select at the same time and hold for 10 seconds until ?LOC? is displayed alternately with the estimated cycle time. To unlock the controls, press Options and Select at the ...
Question about ATF6000ES Front Load Washer
...LOC, washer won't run The door is shut on my front load washer. However, the machine will not run. I get the following message ERR LOC. Just had same problem. After removing boot/rubber gasket around ...
...washer I get a LOC err, Kenmore 417.44092500 front load washer I get a LOC err, how do I reset it or fix it? The LOC code merely means the control responded and locked the door. You'll find a tech ...
...LOC? My washer keeps putting a code LOC across the screen and it will not go off, and I can't get it to go through a cycle. I have misplaced my booklet and I don't know what LOC means. Can you help? ...
ERR LOC on display when I try to start the washer I get the (minutes of wash cycle ) then LOC when I press cancel I get ERR LOC displayed ? Your door lock switch needs replacing.
loc coming up on frigidaire washer front load The controls have been locked unintentionally and this is a safety feature to avoid having someone accidentally stop the washer or modify the cycle. It ...
...washer. "LOC" typically means that your control lock feature is on to remove the lock feature you need to hold down the options and select buttons for ten seconds. I hope this is helpful. ...
Question about ATF6000ES Front Load Washer
...https://www.ifixit.com/Answers/View/260391/loc+code+on+kenmore+elite+washer. press and hold the stop/cancel button on the washer up to 4 seconds or more and the lock should disable on this model ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions