...print server with me i dont know the password what that company admin set to psadmin I want to reset this at any cost please tell me how should i do that viaujocposted a brilliant solution which ...
Question about DP 301P (DP-301P) Print Server
...Link DP 300U print server I Forgotted the Ip of D-Link DP 300U print server. Is there any way to change the IP address???? You may use the PSAdmin software to configure your print server even if you ...
Question about DP 301P (DP-301P) Print Server
Print Server how can i recover DP-301P+ Express EtherNetworkTM Fast Ethernet Print Server defult IP? help plzz You need to connect to it (using the broswer at the PC of same LAN with the current ip of
...Link Print Servers are secure and cannot be reset without the password. The unit will have to be sent to D-Link to be reset. Please contact our RMA department at 800-326-1688 M-F 7AM - 6pm Pacific ...
...it is), you can reset the device to factory defaults from the Tools menu in the web configuration utility. Be aware that you will lose all settings in the print server when you do this. Cheers ...
Question about DP 301P (DP-301P) Print Server
...Print Server D-Link 300U. Please tell me , that how to reset the IP usually by resetting it. pushing the reset button on the back it (tiny hole on the back) for 30 seconds, while plugged in to
Question about DP 301P (DP-301P) Print Server
...password of the D-Link DP-301P+ hi i forgot password Printer Server D_link Dp-301p Please Help Me Solved in http://www.fixya.com/support/t224263-dp301p_psadmin_password_forgoten Use Solution
...Hi As far as I can remember the default IP is 192.168.0 .10, subnet 255.255.255.0 If this isn't the correct IP address, you'll need to reset the d-link print server Hope this helps Regards, ...
...print server and i would like to reset it can you help me to do this, the device don't have any reset button I am looking for a solution as well. Some have said to login as psadmin and use SYSXXXX ...
print server D-Link DP-301P+. I forgot IP address which I was changed according to network settings. There are two steps that we can suggest, A) 1) Install the psadmin software if you have not already
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions