Link DP-301P+. With firmware 3.70 (2007-10-16) the default login name is admin with NO password. Yes! I can Reset Pass for you. No must send it to D-Link: :D Ok. 1. if you have more than one DP 301P:
Question about DP 301P (DP-301P) Print Server
...Link DP 300U print server I Forgotted the Ip of D-Link DP 300U print server. Is there any way to change the IP address???? You may use the PSAdmin software to configure your print server even if you ...
Question about DP 301P (DP-301P) Print Server
...link DP-300 series or DP-301 series print server yourself even if you don't know the password or IP. This comes in handy in situations such as when the server has made up its own password after being ...
DP-301P+ Hi, Logon to the Print Server web configuration and begin managing the DP-301P+, simply launch the browser (e.g. Internet Explorer) and type dlink-xxxxxx, where xxxxxx are the last six digits
...DP-301U Pls let me know the default IP address for configuration Hi As far as I can remember the default IP is 192.168.0 .10, subnet 255.255.255.0 If this isn't the correct IP address, you'll need to ...
...Link DP-301P+. I forgot IP address which I was changed according to network settings. There are two steps that we can suggest, A) 1) Install the psadmin software if you have not already. If you have ...
...ip address i allardy ip confuger but i dont no ip The IP address is configured through your DHCP server in your router. You're going to have to either look in your router for connected devices or use ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions