Questions & Answers for: GMC Envoy no lights working

the break lights don't work 2004 GMC Envoy --- the break lights don't work. the tail lights, reverse lights work fine. break light in the middle works, but not the two on the left and right. brake ...

I HAVE A 1999 gmc SURBRBAN, SAME PROBLEM AS LEFTY64 i WORK THE OVERRIDE BUTTON AND STILL NO LIGHTS. NONE OF THE DOOR SWITHES WILL TURN THE LIGHT ON. I CAN MANUALLY TURN THEM ON WITH THE WHEEL INTERIOR

...lights not working brake lights not working even replace blubs could it be the fuse? look up above your brake pedal and you should see a switch. This switch controls your brake lights and is a common ...

brake lights wont work right tail light wont work 2003 gmc envoy brake lights wont work right tail light wont work check globes and check brake light switch under dash on brake pedal.

...working. Now you need to check the brake light bulbs in the rear tail light assemblies. The brake lights are separate from the tail light (parking or running lights). There are two screws that hold ...

...lights are not working. Does the high mounted brake light work? Do both left and right brake light not work? If none of the brake light work, the problem could be the brake light switch at the brake ...

GMC Envoy 2003 SLT only the parking lights and fog lights work. The low beam and high beam don't work. Please help GMC Envoy 2003 SLT only the parking lights and fog lights work. The low beam and ...

2005 GMC Envoy trailer lights When I hook a trailer (that works with my other vehicle) to my 2005 GMC Envoy, the lights don't work if I have the Envoy lights on. If the lights are on for the ...

...lights work. Only one was not working I took it apart and now neither tailight works. Could not find fuses or relay mark tailights. What do i do next. The tail lights are also called parking ...

...lights working but they stopped when I started the car. It is either the switch at the pedal assembly or possibly the rear lighting module....without a wiring diagram in front of me...hard to ...