Questions & Answers for: light dimmer not dim

a little when the dimmer is slid What sort of light is it , dimmer switches normally only work on Incandescent type lights not flourescent type. Otherwise it sounds as if the dimmer function is faulty

...light off if the dimmer was low enough. I installed it knowing that I was going to change the lighting to commercial electronic canned lights, which I have done. The dimmer is now not showing any ...

...dimmer, but fail to dim my 24v led light strip, what should I do? you must have an led dimming controller also wired to grxtvi 0-10v I see one definite issue here, and possibly a second... First, the ...

...dimmer both turn light on and off. However, dimmer does not dim the light. Dmmer had performed properly until replaced light (did not change dimmer or swith wiring, only reconnected white and black ...

...dimmer turns on and off, but does not dim I have power (black wire) coming into dimmer switch and connected to black wire on dimmer. White wire bypasses to lights. Two red wires on dimmer go out to ...

...dimmer 400w - pro21 can function with led dimmable light "philips master led spot " The answer is NO. You need a Trailing Edge dimmer to control LEDs. The Phillips master LED spot manual says: ...

...light bulbs in the fixture it controls, now it does not work. What is wrong? This switch is designed to dim incandescent lamps. It has nothing in its description about being used with CFL (compact ...

dimmer, or light dimmer?Does the dimmer feel warm to touch? or hot?What does the dimmer control? Incandescent? Fluorescent?How many total watts are being dimmed?Is this a new dimmer or old dimmer that

...dim. Switch hums. Bad dimmer. Probably not using a high enough watt rated switch. Add up the total of all bulbs to be dimmed and get appropriately rated dimmer. 8x60 watt bulbs=480 watts. Make sure ...

...dim to the requested level. Ground for the I/P dimmer switch is provided at G201. sunroof fuse 1 20amp / power windows - circuit breaker 25 amp both of these are located in the instrument panel fuse ...