...LIGHT BULB COULD BE BLOWED.REPLACE HEADLIGHT BULB STILL DONT WORK USE A 12 VOLT TESTLIGHT CHECK TO SEE IF HEADLIGHT BULB SOCKET GETTING POWER WITH LIGHT SWITCH ON POSITION HOOK TEST LIGHT WIRE TO A ...
...light bulb socket, broken wire, or broken/rusted ground connection. Again, check at the light bulb socket for ground on one side (black wire) and 12V (brown wire) on the other. ...
Question about 2002 Blazer
...light socket needs replacing, bulb broke in it. Socket needs replacing. make sure the light is off, better yet turn off the breaker take a potato a little larger than the socket, cut it to size, ...
...light bulb element is broken. 2. Tail light bulb soldered contacts are extremely worn down. 3. Tail light bulb socket corroded. 4. Tail light bulb socket has no power and or ground. 5. Tail light ...
...light bulb socket ground wire for a clean tight connection, that being said the usual suspects are: 1. Faulty ground or power supply wire to headlight bulb socket. 2. Worn down solder contacts or ...
...light on a 2005 passat quit working. Only on the passenger side. Checked the bulb and fuses, all good. High beam works too. I just can't figure it out. the wire inside the bulb socket could be rusted ...
Question about 2005 F 650 CS Scarver
light bulb is in my bath room wall fixture not related to auto If you have a broken light bulb stuck in a fixture and the glass is shatterd, use a potatoe and press it into the broken bulb and socket.
...light bulb element is broken. 2. Tail light bulb soldered contacts are extremely worn down. 3. Tail light bulb socket corroded. 4. Tail light bulb socket has no power and or ground. 5. Tail light ...
Question about MH1150XM Convection/Microwave Oven
...in the socket. After removing the base and installing a new bulb, the bulb would still not light up. Is the light socket broken or something else ? Check the fuse. Should be near the bulb ...
Question about MH1150XM Convection/Microwave Oven
bulb is faulty, it will not light up even if it is installed correctly in a working socket. Try testing the bulb in another socket to see if it works. The socket may be faulty. If the socket is faulty
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
