Questions & Answers for: lift bed

...can i lift the bed off of frame with assistance of three other people. You can lift the bed off, but you'll have to disconnect tailights filler neck, etc anyway, ,so why wouldn't you drop the

...lift..take the fuel neck loose from bed and remove bolts holding bed to frame from the drivers side..loosen the bolts on passenger side..raise the bed on drivers side while watching bumper to bed ...

...lift the bed up and move the bed three steps to the rear of the truck.front of bed is now over the rear tire lower bed on tire and you are now over the fuel tank with full access to pump assembly ...

s pretty easily lifted by 2 people. It can be done on a lift by leaving the bed on. But I've removed somewhere in the area of 10 of these in the last year. Less time consuming to just pull the bed off

...lights, and 3 screws in gas door for the filler neck. And then get a couple buddies to help lift off the bed or use tie-down straps and an engine lift and lift the bed off. Thank you and good luck, ...

...lift the bed or drop the tank. I have lifted the bed on many occasions. Just remove the bolts that hold it to the frame, but leave the two at the rear real loose, That way when you lift the front of ...

What are the beds called that can be lifted up and folded into a closet like space, almost disappearing altogether? This type of bed is known as a Murphy bed.  They are great space savers. &

...lift the bed and slide back onto the bumper. This will give you the room needed to do the job.4 bolts up front( 2 on each side) and 4 in the back. Much easier if you had a chain hoist but lifting ...

...bed except the lower part doesn't lift. The massage works on both head and foot, and the head size will lift and works normally, just for end won't raise or lower, just hear a click when pressing the ...

...lift bed. Hubbell Special product for an MC-42 1007 H I can't work my lift bed! The remote don't work. You may be able to purchase a new remote for your lift bed from the manufacturer or from a ...