Questions & Answers for: license screws

Question about 2002 TrailBlazer

1 Answer

...The license plate lights are in the ledge above the license plate. 2 screws keep the lens cover in place. Remove the screws, and the cover comes off. Just pull the lamp out (wedge base) and

Ad

Question about 1995 DeVille

1 Answer

...license plate holder, first you will need to remove the licence plate and locate & remove the four screws that are holding the part after that you will have to locate about five other screws located ...

Ad

...screws attaching license plate lamp to rear bumper Remove lamp from bumper. Remove bulb socket from lamp. Pull bulb from socket. INSTALLATION Install bulb into socket. Install bulb socket into lamp. ...

Question about 1998 Windstar

1 Answer

...license plate lamp shield with two screws and tighten to 2 Nm (18 lb-in). ItemPart NumberDescription 1 13508 Rear License Plate Lamp Shield 2 14A583 Lamp Lead Wire 3 383356-S Nut (4 Req'd) 4 56000-S ...

Question about 2004 TrailBlazer

1 Answer

...on how to replace license plate bulbs. Remove the 2 screws that retain the license lamp lens to the liftgate. Remove the license lamp lens from the liftgate. Remove the bulb (1) from the

Question about 2002 Grand Cherokee

1 Answer

screws and the license plate light assembly will drop out of the bottom of the trunk, simply twist the blub to unlock it from the light housing pull the bulb straight out of the socket replace it with

screws and license plate lamp visor from liftgate (Fig. 10).(2) Remove bulb from lamp socket.INSTALLATION(1) Install a bulb in lamp socket.(2) Position license plate lamp visor on liftgate and install

Rear license anchor spins. How do I repair? Repair may consist of replacement. License plate screw anchor spins - Nissan Murano Forum www.nissanmurano.org > ... > 2nd Gen (2009 - 2014) May 20, 2014 - ...

Question about 2009 Murano

1 Answer

...license plate light cover retaining screws using a screwdriver. Remove the license plate light cover. Note: You may need to use a small screwdriver to pry the cover off. Step 4: Remove the bulb. ...

...screws holding the license plate light assembly inside the trunk lid. Remove the screws (caution: in winter, plastic is extremely fragile and can break easily). Once the screws are off, your license ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...