Questions & Answers for: lg washer continues fill

lg washer my WM2032HW washer continues to fill with water after the cycle is complete. any sugestions? also my lg DLE5932W clothes dryer will not operate in the normal setting. any help would be ...

LG WM1832CW Front Load Washer FE warning comes on and rinse spin cycle takes too long; cold water seems continuous. FE means water is overflowing. Check pump filter. Check water level switch and hose.

LG Font Load Washer flashing error code FE FE is Fill Error. If door is closed and washer is plugged in, FE means water is too high and water pump will turn on. This happens most often when a water ...

LG WM2016CW that has a IE error code? IE. is inlet water valve error. Make sure someone did not turn off the water to the washer!!!! Remove fill hoses and check filter screens on washer and fill hoses

...Washer fills up with water and continues to fill with cold water. Even if the washer is off, the water keeps filling. If water runs in when the machine is OFF but stops when the tap is turned off it ...

...LG washer is filling with water when the machine is off; is this due to a leaky inlet valve? Hi, If you have a problem with your washeror dishwasher continuing to fillwith water after the valve has ...

...washer will run the first cycle correctly, cutting off the water supply. however, after the first cycle, it will not stop filling with water. it will continue to fill into the spin cycle which causes ...

LG front load washer continues to fill with water after spin cycle Water won't stop filling after spin cycle completes Bad water valve or main board. the water valve closes when it stops receiving ...

...is true no power to washer and water enters machine it is very likely that the fill solenoid has failed. this part is not that difficult to replace. Water Inlet Valve part 5220FR2008F LG Washer ...

...LG Fuzzy Logic WF-T1022TP let in more water than the level according to the weight of the bundle, sometimes even until the drum overflows. Is there something wrong with the computer? Try shutting off ...