lens cover don't open After a drop of the protective lens stay locked, now every time the turn is opened partially sacudiendola a little opening and draws pictures normally lens opens about 25% . Will
Question about PowerShot SD300 / IXUS 40 Digital Camera
...lens was open , and it it would not close and the E18 error was showing up, I gently pressed the lens down until it had clicked close, I though this would solve the issue , now it will not open and ...
Question about PowerShot SD500 / IXUS 700 Digital Camera
...lens fails to open, stating: Lens Failure, Restart. However it continuously fails, and the afore message reappears. The solution is pointing up the problem as not being isolated, but gross design ...
...lens on my Canon Ixus 860 is stuck open. How do I close it? hi If your lens comes out and retracs during power on or off then the spring that closes the lens is either broken or off trac. If you are ...
Question about Lumix DMC-TZ3 Digital Camera
...open My Canon A560 lens cover is stuck and will not open fully without help. I touch it with my fingertip and it opens. HELP! You can refer this guide, fix it DIY How to fix a sticky lens barrier on ...
...lens cover is stuck and will not open fully without help. I touch it with my fingertip and it opens. HELP! Please see the following article on automatic lens covers: ...
lens open Camera stopped working with lens open. Thought it was batteries but new batteries don't make a difference. Camera power is dead and lens is open. Nothing works. ur lens belt is broken relace
...lens stuck open with lens error Canon A580 lens stuck open with lens error. Changed the AA batteries but not the disc battery. Could this be the problem Put in real Kodak batteries. pull out the lens ...
...Canon first. there lens diapharm unit is faulty its not opening and closing. thats why you getting err99 you check youself diapharm unit is working or not put you camera in AV mode and set max. ...
Question about PowerShot SX1 IS Digital Camera
Lens is closed and i do not hear any sound from the motor. I open it again and had the motor out, conect all on the power bord and saw that when i push the ON button the motor do not move 1mm. I saw a
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions
