Questions & Answers for: Suzuki lean mixture

...lean. To richen the mixture at the half-way trottle, raise the fuel level in the carbs. At closed or less than 1/4 open trottle, set with the mixture idle screws. Check also the rubbers between carbs ...

the computer will make it a rich or lean mixture to start the engine,if it tells the computer that it is 75 degrees the computer will lean the mixture like starting a car in the winter without a choke

...exhaust causing air to get in, when mixture is a bit too lean air will get in and fire as gases build up in the header pipes. Check for leaks in the exhaust and also intake, lean mixture is the ...

...lean. It seems as though they have not been balanced properly and the mixture not accurately adjusted. The settings on these carburettors are critical and must be adjusted with the proper gauges. I'd ...

...lean mixture will cause backfiring. The flame travel through a really lean mixture is about the speed you walk, and is still making its way through the mixture when the cranking stops, then it flows ...

...lean mixture turn screw counter clock wise 1/4 turn,if they are between carb and motor then they are fuel air,to lean turn clock wise 1/4 turn.then check.may have to try couple times.carbs may still ...

...mixture screw is underside of carb,if its between cylinder and front side of carb its fuel/air,to lean turn screw clockwise,if its between backside of carb and air box/filter,its air/fuel,turn screw ...

lean. gas is not getting to the idle ports. try removing the idle mixture screw and shooting some carb cleaner in there. make sure you get all of the mixture screw parts out first. Reinstall screw and

...WAY IN,, THEN 1 AND 1/2 TURN OUT. JUST WATCH THE COLOR OF YOUR SPARK PLUG AFTER A RIDE; IT SHOULD BE LIGHT BROWN, IF IT IS VERY LIGHT, THE MIXTURE IS TOO LEAN, IF IT IS DARK, THE MIXTURE IS TOO

Where is the fuel air mixture screw on the 02suzuki boulevard s50 It is a screw on the carburetor; IN = lean, OUT = rich mixture.